Inlaid Die Cuts

Hello! A new challenge started at Mix It Up. The challenge is to use an inlaid die cut. To be completely honest, I had never heard of this technique and so google helped me. Haha! What an interesting and fun time I had. I should have gone for a more simple die cut, but I never take the easy way! Haha!

I started with a Prima watercolor paper that already had a resist on it. I added some Lindy's magicals from my favorite Steampunk set and got to adding some color. The paper took the water like a champ! I totally enjoy how the magicals flow together and work so beautifully together!

Now comes the inlaid die cut part. After google, and my team explained this technique to me, I was intrigued to try it! So, I used a Sizzix Tim Holtz MM#2 die and cut it out of my paper. I saved all of those little tiny pieces and then cut the die again using white fun foam. I was able to keep the fun foam in the die cut and then just laid that into the paper die cut. Whew! That saved some time. 

Then I started to add the paper die cut on top of the inlaid foam die cut. Very time consuming but also kind of relaxing. I knew where the pieces needed to go and just went at it. I used TomBow glue for this step. 

I added a Reneabouquets butterfly and another die cut for the sentiment (thank you to Sara Emily for that one!). The sentiment die cut was heat embossed using white and gray powders. It is a bit wonky but so am I.

I then added some lovely flowers (also from Reneabouquets) and a handmade bow I made from some crinkle ribbon. I used Lindys Stamp Gang mists for the ribbon.

And there is my take on the inlaid die cut technique. Have you tried this before? I may be the only to have not heard about this technique. Lol! Carpe Diem! Hugz! ~Niki

I am going to share this creation with these lovely challenges:

Mixed Media World-Anything Goes with a Mood board Twist

I was inspired by the colors from the peacock feathers and the swirls in the tree picture.

Simon Says Stamp Wednesday Challenge-Anything Goes

Deep Ocean Challenge #162-Favorite Color Combo

Of course my favorite color combo is blue with hints of grungy rust and white

4 Crafty Chicks #366-Anything Goes and a Cray Egg

Scrappy Land Challenge #72-Anything Goes

Elegant in Gray

Gray is one of my favorite colors and I have incorporated it into my entire house. Gray and grey can be used interchangeably and that is okay by me. I wanted to make an elegant gray top hat that is more feminine and had some lace and frills. Here is the end result.  

I was lucky enough to be asked to be a guest designer at Xanderous Crafty Stash again and have used metal pieces from there. All of the metal pieces were heat embossed using a mix of white, gray, and silver embossing powders. I layered the metal pieces to create a flower look and used a brad for the middle. 

The hat was painted silver gray in layers. I wanted to make sure the hat had a nice even coat of paint over it. The inside of the hat was painted as well. The lace was adhered to the hat with hot glue and shaped to form around the base of the hat.

The little rivets that are on the top of the hat with the bands are made using a hole punch and glued with glossy accents. This hat was meant to look crisp, clean and ready for a photo shoot.

The largest feather was curled using some tricks I have learned about working with feathers. It creates such a wonderful added dimension to the feather cluster. And feathers can also be colored using food coloring (more about that later).

This mini top hat is the most frilly hat I have designed so far. I do have to say that I like the overall look and feel of the hat. Using quality lace was a must. I don't like that itchy lace stuff!

The back of the hat (above picture) features another metal flower cluster. The lace was gathered in the back and draped over the edge for a nice Victorian feel. And that lace is so soft!

The top view of the hat shows the "rivets" better. Just a regular old one hole punch produced these rivets. You don't need anything fancy to make em.

This side view of the hat shows the gathering of the lace around the base of the hat. Because the hat has a curve to it, I had to figure out a way for the lace to lay flat. By gathering the lace at the back of the hat and only gluing the bottom of the lace, I was able to form it better. Trial and error. Haha! I so enjoy making these hats and trying different designs. The sky really is the limit for my designs. I hope you enjoyed!

I would like to share this altered mini top hat with these amazing challenges:

Emerald Creek Dares-Anything Goes August

Altered Eclectics-Anything Mixed Media/Altered Art

Crafting By Designs-Anything Goes September

Day Dreamer Challenges-Anything Goes

Simon Says Stamp Wednesday Challenge-Anything Goes

Dark Harlequin Mini Top Hat

It sure has been a bit since I made a mini top hat. I have been itching to design a new one. With a new challenge at Mix It Up, I figured this would be a great time to get started! I didn't use the twist of Paper Piecing but the stencil sure was pieced together!

I started with my usual craft foam and drew out the template. Then I painted everything with red acrylic paint (2 layers) and grabbed a Tim Holtz Harlequin stencil. I used black texture paste through the stencil.

Once the texture paste was dry, I cut out the different pieces. The hardest part was waiting for the texture paste to dry! I didn't use a heat tool because the foam will change shape. 

I glued all the pieces together with contact cement. That is the ONLY glue that will hold this hat together. Nope, don't try hot glue. It doesn't work well.

I grabbed some metal pendants and such from my stash and used black alcohol ink on the pendant hanging on the front of the hat. The skull is from Emerald Creek and I applied Snow Cap AI to it. 

The "ribbon" around the base of the hat is leftovers from another project. I also made a little bow out of it.

The skull lady pendant is from Tim Holtz. The feathers were glued together and shaped with the back of my dull scissors. The skeleton hand is leftover from Halloween and painted black with white highlights for the bones.

The top of this hat has a Creative Embellishment rose chippie. I used Emerald Creek Classic embossing powder-Candy Red and adhered it with Tombow glue. Ta-da! Sounds easy but this took me awhile to create. Carpe Diem! ~Niki

I want to share this design with these wonderful challenges:

Stamps and Stencils-Technique School

My process is the making of a hat from scratch. Try it! You won't be disappointed. 

Emerald Creek Dares-Anything Goes

Creative Artiste #29-Anything Mixed Media

Love to Create 16-Anything Mixed Media Goes

Octopoda

Hello lovelies and welcome to my blog! Some of you may know about my mini top hat obsession. I wanted to challenge myself even further and add a more prominent sculpt to a hat. I set about creating Octopoda! Hope you enjoy because this was by far the most fun I have had designing a top hat! When I make these hats I am a Mad Hattress Maven, hence the new copyright.

I started with the usual foam template and glued everything together. Then I set about using my new Finnabair Patina pastes! These pastes are awesome and dry super fast! Two of the paints have texture included in it. I just added color where I wanted it and the texture was an added bonus!

I used the brass color last instead of first like some people do. I always seem to do things backward. Haha! I added the pastes with my fingers and also with some different brushes. Then the pastes got a dusting of Artisan powder-La Chapelier. This added a nice grunge to the hat. 

I then grabbed some random metal pendants and pieces and coated those with the same pastes and powders. Everything looks like it goes together well but all were painted differently. Then I started on the sculpt of the octopus. I have never tried this before and was overwhelmed.. 

I ended up watching multiple YouTube videos about sculpting an octopus and came across a video by Stephanie Kilgast that helped immensely! I was then able to to begin my sculpt and just have a good play with the clay. The legs took forever because I kept breaking the darn things off! Oops. I realized I was making my legs way too small! Haha! The little suction cups took a lifetime to create, well it seemed like a lifetime and my fingers were sore. Next time I may try some beads instead. 

The octopus was painted with Finnabair Art Alchemy paints-Metallic Mermaid and Deep Water. I kept layering the colors until I was happy. I added some white dots around the head of the octopus because it looked good to me and helped define the head. 

Top of the hat

All of the trinkets and tid bits you see were altered (painted) with the patina pastes and artisan powders. The netting was leftover from a project I did about a year ago. The shells are real and are a gift from a friend of mine. I also added some "pearls' and blue "bubbles"

Side view of the hat

The pictures of this hat really don't capture the essence of the piece, but I am probably my own worst critic. Aren't we all? Every time I look at this design I am surprised to say that I MADE this piece! 

Back of the hat

The back of the hat shows more of the netting and adds a nice texture as well. I think the netting was what made me decide to create a sea themed design. 

The octopus

A closer look at the octopus. It was a doozy creating those legs but in the end, the effort was totally worth it and then some! Those little suctions are awesome sauce and little devils as well.

Side view of the octopus

Can you see the little white dots that help to define the head of this octopus? I also added some to his body as well and then painted a light coat of the Metallic Mermaid over the dots so it wasn't such a stark contrast.

Top side view of the octopus

Do enjoy the journey and stop to learn from different artists. I so enjoy seeing what others are making and different ways to incorporate new ideas into my designs! Hugz and Carpe Diem!

I would like to share this design with these challenges:

Mixed Media Place July Challenge-Moodboard

I was inspired by the ocean and the quote. 

We Love to Create-Anything Mixed Media

Mixed Media and Art thematic challenge-Blue Sea with the element Star

Frilly and Funkie-Read Any Good Books Lately?

I have been reading the Shade series (a total of 45 books) and they talk about these evil mermaids

that live in the sea and have sea pets. This octopus looks like one of their pets. 

SanDee&Amelie's 2017 Summer Special Steampunk Challenge

Scrap Stamping Moodboard Lord of Time

I was inspired by the gears and overall Steampunk vibe of this board. 

Blues and Metal

Today is the day that I can share my second guest design for Xandeous Crafty Stash! I enjoy working with metal trinkets and tid-bits and Naomi (the owner of XCS) was kind enough to let me have a play. With so many wonderful challenges going on I wanted to create a design that fit all so I decided to keep it blue. For some reasons blues are more easy for me to work with. I have been working on trying to create more layers, texture and composition in my designs. Exploring the possibility is what I am enjoying right now. Here is the final result.

I started by applying black gesso to my background board (compliments of Autumn from Sew Paper Paint) and adding some stenciling with black modeling paste. 

Then I had to decide on the composition of the pieces. Every metal piece you see is from Xandeous Crafty Stash! The paintbrushes are from my stash. Everything was glued down with multi matte medium. 

Once you have everything glued and in its place, apply more black gesso and cover it all up. 

To add even more texture I randomly slopped on some texture paste. That's the white gritty lookin stuff in the picture below. 

A thin coat of DecoArt Prussian Blue Hue was brushed over the entire piece, then another thin layer. Once that was dry I kept using different DecoArt blues to create different layers of blue colors. Cobalt Teal Hue, Cobalt Turquoise Hue and Turquoise Water. Around the edge, where most of the texture paste is I added some Quinacridone Gold. And some Q-gold in other random spots. 

Then came the dry brushing using different shades of white. The best white I use for dry brushing is DecoArt Titanium White.

I would like to share this design with these fun challenges:

Creative Artiste #28-Anything Goes

More Mixed Media-Anything Goes Optional twist of Pastel

Happy Little Stampers Mixed a Media Challenge-Texture

Mixed Media And Art Moodboard

*I was inspired by those lovely paintbrushes and the textured wall. 

An Inky Mess-Anything Goes Mixed Media

Galaxy Card with Distress Ink

Wowzers! Can you believe we are more than halfway through 2017!?! Say what! Pretty soon the summer will be over and that means back inside out of the cold. But enough about that glum price of news. I wanted to try to create a galaxy card using distress ink and because our new challenge over at Mix It Up is all about Distress Inks/Distress Tool, I had a go. Enjoy!

I started with some heavyweight white card stock and began blending distress ink colors. I went from the lightest color to the darkest and spritzed my card stock with water along the way. 

Next time I'll try using watercolor paper instead. :) I heat dried my card and then added the darkest distress ink-black soot. 

Then I smooshed black soot and mermaid lagoon onto my craft mat and spritzed with water. I added the ML randomly to the card to create an almost blue swirl. Then I did the same with the black soot. And heat dried it again. I then watered down some white heavy acrylic paint and splatter the entire card to create some "stars". 

While my card was drying (under a heavy book) I got started on the stars. I used some Snow Cap alcohol ink on the rusty stars and poured some DecoArt glitter to those while wet. Once everything was dry I added some TH chitchat stickers and glued the stars down with a hot glue gun. Viola!

 My first attempt at a galaxy card. Whew! The best part about this technique is there is no set pattern or colors to use. Just enjoy the process. Hugz and Carpe Diem! ~Niki

I would like to share this design with these wonderful challenges:

Scrapki-Wyzwaniowo-Beauty

What is more beautiful than the galaxy we live in. :)

LTSCB #99-Anything Goes 

Creative Embellishments-July Inspiration 

I was inspired by the night sky fireworks and the stars. 

LTCCB #12-Anything Goes

Crafting By Design-July Anything Goes 

Altered Tree Bark

Hello all! My have the hands been busy this summer! Between my crafting and my power tools, I don't know what keeps me more happy. I have decided to alter a piece of a tree trunk that was leftover from a recent cut down. The tree was dead and needed to be taken down because it was so close to the house. This piece is for my guest spot over at Xanderous Crafty Stash. She has everything from metal trinkets, bling bling, rhinestones, lace appliques and so much more!

I started with applying a white wash to the bark just to lighten it up a bit.

 After the wash I used multiple stamps with black Archival ink and added some more interest to the bark. 

While that was drying I started heat embossing all of the wonderful metal trinkets from Xanderous Crafty Stash. Each metal piece got at least two coats of embossing powder just so I could make sure none of the metal peeked through.

I layered the metal pieces to create a butterfly and some metal coral colored flowers. Then I added some moss and grass. The sign "This Way" is from Prima. 

Hugz and Carpe Diem! ~Niki

The stamping is subtle but in real life it pops more. Hopefully this picture below shows the stamping okay. 

I would like to share this design with:

Altered Eclectics-Anything Goes 

Mixed Media Place-June Moodboard

I was inspired by all things nature

Her Tool Belt Linky Party 179

Country View Challenges-Things with Wings

Simon Says Stamp Wednesday Challenge-Anything Goes